14297SET AZUL 4-5-6-8-10-12 TIALN-TOP-FRESA PMX DIN844W 3Z-TIALN-TOP
mat PMX
mat PMX+TIALN-TOP
DIN 844 W
caract fresa 3z corte centro
caract broca angulo helice 45
caract fresa mango weldon
caract fresa frontal recta
aplic acabado
cotas fresa cilindrica
aplic fresa ranurado 01 3z 1
PDF Cat.
tabla materiales ind
formula fresas

Ref.: 6430

18,00 mm-END MILL PMX DIN844W 3Z-TIALN-TOP

Product Code: 45444
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 844
DIN Type Tooltip
COM_VIRTUEMART_336123
  • W
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • PMX
Coating Tooltip
COM_VIRTUEMART_336103
  • TIALN-TOP
D mm Tooltip
COM_VIRTUEMART_335920
  • 18.00
d mm Tooltip
COM_VIRTUEMART_335925
  • 16.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 92.00
l mm Tooltip
COM_VIRTUEMART_336002
  • 32.00
Z Tooltip
COM_VIRTUEMART_336171
  • 3
Helix Angle Tooltip
COM_VIRTUEMART_335881
  • 45º
Shank
COM_VIRTUEMART_336020
  • Weldon
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Aluminium-Magnesium
  • Stainless
Mat Tooltip
COM_VIRTUEMART_336022
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
  • Austenitic Stainless (<250 HB / <850 N/mm2)

2.1 Austenitic Stainless  (<250 HB / <850 N/mm2)                    Feed (mm/rev.) 0,075    Cutting Speed (m/min.) 20-25 
6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2)                        Feed (mm/rev.) 0,150    Cutting Speed (m/min.) 290-420 
6.2 Al-Mg Si < 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,150    Cutting Speed (m/min.) 290-420 
6.3 Al-Mg Si > 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,115    Cutting Speed (m/min.) 90-170 

Comparative


You have no product to compare.