4286810,00 mm-FRESA MICROGRANO IZAR-STD.W LARGA 1Z ALUMINIO MANGO-8/10-
mat MD
IZAR STD W
caract fresa mango liso
caract fresa frontal recta
aplic acabado
cotas fresas sin cuello
aplic ranuras t
PDF Cat.
tabla materiales ind
formula fresas

Ref.: 9414

08,00 mm-END MILL MICROGRAIN IZAR-STD.W LONG 1Z ALUMINIUM SHANK-8/10

Product Code: 42865
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • IZAR Std.
DIN Type Tooltip
COM_VIRTUEMART_336123
  • W
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • MD/HM
D mm Tooltip
COM_VIRTUEMART_335920
  • 8.00
d mm Tooltip
COM_VIRTUEMART_335925
  • 8.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 100.00
l mm Tooltip
COM_VIRTUEMART_336002
  • 28.00
Z Tooltip
COM_VIRTUEMART_336171
  • 1
Shank
COM_VIRTUEMART_336020
  • Straight
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Aluminium-Magnesium
Mat Tooltip
COM_VIRTUEMART_336022
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
N.3 mm/rev. Tooltip
COM_VIRTUEMART_335846
  • 0.030
N.3 Vc Tooltip
COM_VIRTUEMART_335848
  • 100-200
N.4 mm/rev. Tooltip
COM_VIRTUEMART_335850
  • 0.030
N.4 Vc Tooltip
COM_VIRTUEMART_335852
  • 100-200
COM_VIRTUEMART_335856 Tooltip
COM_VIRTUEMART_335856
  • 100-200

N.3 Al-Mg non-alloyed (<100 HB / <350 N/mm2)                        Feed (mm/rev.) 0,030       Cutting Speed (m/min.) 100-200 
N.4 Al-Mg Si < 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,030       Cutting Speed (m/min.) 100-200 
N.5 Al-Mg Si > 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,030       Cutting Speed (m/min.) 100-200 

Comparative


You have no product to compare.