5373505,00 mm x L80 90º d=8-FRESA PULIDA MICROGRANO 1Z ALUMINIO LARGA-
mat MD GRANO UF
helice 30
caract fresa mango liso
aplic perfil
cotas fresa cilindrica
aplic ranuras t
PDF Cat.
tabla materiales ind
formula fresas

Ref.: 9417

05,00 mm x L110 90° d=8-1Z LONG MIRROR POLISHED MICROGRAIN END MILL

Product Code: 19806
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • IZAR Std.
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • Micrograno+
D mm Tooltip
COM_VIRTUEMART_335920
  • 5.00
d mm Tooltip
COM_VIRTUEMART_335925
  • 8.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 110.00
l mm Tooltip
COM_VIRTUEMART_336002
  • 40.00
Z Tooltip
COM_VIRTUEMART_336171
  • 1
Point Angle Tooltip
COM_VIRTUEMART_335884
  • 90º
Helix Angle Tooltip
COM_VIRTUEMART_335881
  • 30º
Shank
COM_VIRTUEMART_336020
  • Flat
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Aluminium-Magnesium
  • Synthetic-Plastics
Mat Tooltip
COM_VIRTUEMART_336022
  • Thermo-Plastics
  • Hard-Plastics
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
N.3 mm/rev. Tooltip
COM_VIRTUEMART_335846
  • 0.050
N.3 Vc Tooltip
COM_VIRTUEMART_335848
  • 100-350
N.4 mm/rev. Tooltip
COM_VIRTUEMART_335850
  • 0.050
N.4 Vc Tooltip
COM_VIRTUEMART_335852
  • 100-350
COM_VIRTUEMART_335856 Tooltip
COM_VIRTUEMART_335856
  • 100-350
COM_VIRTUEMART_335860 Tooltip
COM_VIRTUEMART_335860
  • 100-200

N.3 Al-Mg non-alloyed (<100 HB / <350 N/mm2)                        Feed (mm/rev.) 0,050       Cutting Speed (m/min.) 100-350 
N.4 Al-Mg Si < 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,050       Cutting Speed (m/min.) 100-350 
N.5 Al-Mg Si > 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,050       Cutting Speed (m/min.) 100-350 
N.6  Thermo-Plastics                                                Feed (mm/rev.) 0,030       Cutting Speed (m/min.) 100-200 
N.7  Hard-Plastics                                                  Feed (mm/rev.) 0,025       Cutting Speed (m/min.) 50-125 

Comparative


You have no product to compare.