7721506,00 mm-FRESA MICROGRANO IZAR STD. 3Z ALUMINIO 45º PULIDO ESPEJO-
mat MD GRANO UF
caract fresa 3z corte centro
caract broca angulo helice
caract fresa mango liso
caract fresa frontal recta
aplic acabado
cotas fresas sin cuello
aplic fresa ranurado 01 3z 1
PDF Cat.
tabla materiales ind
formula fresas

Ref.: 9437

04,00 mm-END MILL MICROGRAIN IZAR-STD. 3Z ALUMINIUM 45º MIRROR POLISHED

Product Code: 77214
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • IZAR Std.
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • UF Grain
D mm Tooltip
COM_VIRTUEMART_335920
  • 4.00
d mm Tooltip
COM_VIRTUEMART_335925
  • 6.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 50.00
l mm Tooltip
COM_VIRTUEMART_336002
  • 12.00
Z Tooltip
COM_VIRTUEMART_336171
  • 3
Helix Angle Tooltip
COM_VIRTUEMART_335881
  • 45º
Shank
COM_VIRTUEMART_336020
  • Flat
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Copper-Bronze-Brass
  • Aluminium-Magnesium
Mat Tooltip
COM_VIRTUEMART_336022
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
  • Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
N.1 mm/rev. Tooltip
COM_VIRTUEMART_335838
  • 0.020
N.1 Vc Tooltip
COM_VIRTUEMART_335840
  • 180-250
COM_VIRTUEMART_335844 Tooltip
COM_VIRTUEMART_335844
  • 180-250
N.3 mm/rev. Tooltip
COM_VIRTUEMART_335846
  • 0.035
N.3 Vc Tooltip
COM_VIRTUEMART_335848
  • 350-500
N.4 mm/rev. Tooltip
COM_VIRTUEMART_335850
  • 0.035
N.4 Vc Tooltip
COM_VIRTUEMART_335852
  • 350-450
COM_VIRTUEMART_335856 Tooltip
COM_VIRTUEMART_335856
  • 190-290

N.1 Short Chip Copper-Bronze-Brass  (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,020       Cutting Speed (m/min.) 180-250 
N.2 Long Chip Copper-Bronze-Brass   (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,020       Cutting Speed (m/min.) 180-250 
N.3 Al-Mg non-alloyed (<100 HB / <350 N/mm2)                        Feed (mm/rev.) 0,035       Cutting Speed (m/min.) 350-500 
N.4 Al-Mg Si < 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,035       Cutting Speed (m/min.) 350-450 
N.5 Al-Mg Si > 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,035       Cutting Speed (m/min.) 190-290 

Comparative


You have no product to compare.