4033430,00 mm-FRESA DESBASTE GRUESO HSSE8% DIN844WR 3Z-
mat HSSE 8%CO
mat HSSE 8%CO+TIALSIN
DIN 844 WR
caract fresa 3z corte centro
caract broca angulo helice 40
caract fresa mango weldon
caract fresa frontal recta
aplic desbaste grueso
cotas fresa cilindrica
aplic fresa desbaste 01
aplic fresa desbaste 02 1
PDF Cat.
tabla materiales ind
formula fresas

Ref.: 4447

13,00 mm-END MILL COARSE ROUGHING HSSE8% DIN844WR 3Z

Product Code: 78851
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 844
DIN Type Tooltip
COM_VIRTUEMART_336123
  • WR
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • HSSE 8% Co
D mm Tooltip
COM_VIRTUEMART_335920
  • 13.00
d mm Tooltip
COM_VIRTUEMART_335925
  • 12.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 83.00
l mm Tooltip
COM_VIRTUEMART_336002
  • 26.00
Z Tooltip
COM_VIRTUEMART_336171
  • 3
Helix Angle Tooltip
COM_VIRTUEMART_335881
  • 40º
Shank
COM_VIRTUEMART_336020
  • Weldon
ISO Tooltip
COM_VIRTUEMART_336000
  • 1641/1
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Aluminium-Magnesium
  • Copper-Bronze-Brass
  • Steel
Mat Tooltip
COM_VIRTUEMART_336022
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
  • Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Construction / Carbon Steel (<250 HB / <850 N/mm2)

1.1 Construction / Carbon Steel  (<250 HB/<850 N/mm2)               Feed (mm/rev.) 0,100    Cutting Speed (m/min.) 30-40 
5.1 Short Chip Copper-Bronze-Brass  (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,100    Cutting Speed (m/min.) 60-100 
5.2 Long Chip Copper-Bronze-Brass   (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,100    Cutting Speed (m/min.) 60-100 
6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2)                        Feed (mm/rev.) 0,100    Cutting Speed (m/min.) 160-200 
6.2 Al-Mg Si < 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,100    Cutting Speed (m/min.) 160-200 
6.3 Al-Mg Si > 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,100    Cutting Speed (m/min.) 50-80 

Comparative


You have no product to compare.