40512SET-AVELLANADOR HSS DIN373 ALLEN-
HSS
DIN 373
cotas 2530
caract broca mango cilindrico
PDF Cat.
tabla materiales ind
formula brocas

Ref.: 2530

14,00 mm-COUNTERBOR HSS DIN373 ALLEN

Product Code: 42050
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 373
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • HSS
d mm Tooltip
COM_VIRTUEMART_335925
  • 16.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 100.00
l mm Tooltip
COM_VIRTUEMART_336002
  • 22.00
Z Tooltip
COM_VIRTUEMART_336171
  • 4
Shank
COM_VIRTUEMART_336020
  • Straight
A mm. Tooltip
COM_VIRTUEMART_335866
  • 24.00
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Aluminium-Magnesium
  • Copper-Bronze-Brass
  • Thermo-Resistant Alloys
  • Cast Iron
  • Stainless
  • Steel
Mat Tooltip
COM_VIRTUEMART_336022
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Titanium Alloys
  • Cast Iron (<200 HB / <700 N/mm2)
  • Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
  • Alloyed Steel (<300 HB / <1000 N/mm2)
  • Construction / Carbon Steel (<250 HB / <850 N/mm2)

1.1 Construction / Carbon Steel  (<250 HB/<850 N/mm2)               Feed (mm/rev.) 0,120    Cutting Speed (m/min.) 15-20 
1.2 Alloyed Steel  (<300 HB / <1000 N/mm2)                          Feed (mm/rev.) 0,080    Cutting Speed (m/min.) 10-15 
2.2 Ferritic/Martensitic Stainless  (320HB/<850 N/mm2)              Feed (mm/rev.) 0,060    Cutting Speed (m/min.) 4-8 
3.1 Cast Iron  (<200 HB / <700 N/mm2)                               Feed (mm/rev.) 0,150    Cutting Speed (m/min.) 10-20 
4 Titanium Alloys                                                   Feed (mm/rev.) 0,060    Cutting Speed (m/min.) 8-12 
5.1 Short Chip Copper-Bronze-Brass  (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,120    Cutting Speed (m/min.) 20-30 
5.2 Long Chip Copper-Bronze-Brass   (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,160    Cutting Speed (m/min.) 20-30 
6.3 Al-Mg Si > 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,160    Cutting Speed (m/min.) 8-12 

Comparative


You have no product to compare.

24h lateral