6844625,00 mm-AVELLANADOR MICROGRANO DIN335C 90º-
mat HSSE 5%CO
DIN 335 C
caract avellanador punta 90
cotas 2575
caract broca mango cilindrico
PDF Cat.
tabla materiales ind
formula brocas

Ref.: 2575

19,00 mm-COUNTERBOR HSS DIN335C 90º

Product Code: 74671
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 335
DIN Type Tooltip
COM_VIRTUEMART_336123
  • C
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • HSS
D mm Tooltip
COM_VIRTUEMART_335920
  • 19.00
d mm Tooltip
COM_VIRTUEMART_335925
  • 10.00
Counterbor Angle Tooltip
COM_VIRTUEMART_335877
  • 90º
Shank
COM_VIRTUEMART_336020
  • Straight
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Synthetic-Plastics
  • Aluminium-Magnesium
  • Copper-Bronze-Brass
  • Stainless
  • Steel
Mat Tooltip
COM_VIRTUEMART_336022
  • Thermo-Plastics
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
  • Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
  • Austenitic Stainless (<250 HB / <850 N/mm2)
  • Construction / Carbon Steel (<250 HB / <850 N/mm2)

1.1 Construction / Carbon Steel  (<250 HB/<850 N/mm2)               Feed (mm/rev.) 0,150    Cutting Speed (m/min.) 15-20 
2.1 Austenitic Stainless  (<250 HB / <850 N/mm2)                    Feed (mm/rev.) 0,100    Cutting Speed (m/min.) 4-8 
2.2 Ferritic/Martensitic Stainless  (320HB/<850 N/mm2)              Feed (mm/rev.) 0,080    Cutting Speed (m/min.) 4-8 
5.1 Short Chip Copper-Bronze-Brass  (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,150    Cutting Speed (m/min.) 20-30 
6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2)                        Feed (mm/rev.) 0,190    Cutting Speed (m/min.) 15-25 
6.2 Al-Mg Si < 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,190    Cutting Speed (m/min.) 15-25 
6.3 Al-Mg Si > 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,190    Cutting Speed (m/min.) 8-12 
7.1  Thermo-Plastics                                                Feed (mm/rev.) 0,200    Cutting Speed (m/min.) 20-30 

Comparative


You have no product to compare.

24h lateral