8030111,20 mm-BROCA HSSE DIN1897TS EXTRA-CORTA -TIALSIN
mat HSSE 5%CO
mat HSSE 5%CO+TIALSIN
DIN 1897 TS
caract broca angulo punta 135
caract broca afilado u 1
caract broca perfil parabolico
cotas 1000
aplic taladrado -3d
PDF Cat.
tabla materiales ind
formula brocas

Ref.: 1055

10,20 mm-DRILL BIT HSSE DIN1897TS STUB-TIALSIN

Product Code: 80300
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 1897
DIN Type Tooltip
COM_VIRTUEMART_336123
  • TS
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • HSSE 5% Co
Coating Tooltip
COM_VIRTUEMART_336103
  • TIALSIN
D mm Tooltip
COM_VIRTUEMART_335920
  • 10.20
d mm Tooltip
COM_VIRTUEMART_335925
  • 10.20
L mm Tooltip
COM_VIRTUEMART_336001
  • 89.00
l mm Tooltip
COM_VIRTUEMART_336002
  • 43.00
Point Angle Tooltip
COM_VIRTUEMART_335884
  • 135º
Shank
COM_VIRTUEMART_336020
  • Straight
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 5
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Steel
  • Cast Iron
  • Aluminium-Magnesium
  • Synthetic-Plastics
Mat Tooltip
COM_VIRTUEMART_336022
  • Alloyed Steel (<300 HB / <1000 N/mm2)
  • Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
  • Cast Iron (<200 HB / <700 N/mm2)
  • Cast Iron (200-300 HB / 700-1000 N/mm2)
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Thermo-Plastics
P.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) Tooltip
COM_VIRTUEMART_335807
  • 0.120
Cutting Speed (m/min.) Tooltip
COM_VIRTUEMART_335809
  • 28-35
P.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/1000-1300N/mm2) Feed (mm/rev.) Tooltip
COM_VIRTUEMART_335811
  • 0.090
Cutting Speed (m/min.) Tooltip
COM_VIRTUEMART_335813
  • 12-20
K.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) Tooltip
COM_VIRTUEMART_335826
  • 0.210
Cutting Speed (m/min.) Tooltip
COM_VIRTUEMART_335828
  • 36-42
K.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) Tooltip
COM_VIRTUEMART_335830
  • 0.170
Cutting Speed (m/min.) Tooltip
COM_VIRTUEMART_335832
  • 30-36

1.2 Alloyed Steel  (<300 HB / <1000 N/mm2)                          Feed (mm/rev.) 0,120       Cutting Speed (m/min.) 28-35 
1.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/850-1300N/mm2)  Feed (mm/rev.) 0,090       Cutting Speed (m/min.) 12-20 
3.1 Cast Iron  (<200 HB / <700 N/mm2)                               Feed (mm/rev.) 0,210       Cutting Speed (m/min.) 36-42 
3.2 Cast Iron  (200-300 HB / 700-1000 N/mm2)                        Feed (mm/rev.) 0,170       Cutting Speed (m/min.) 30-36 
6.3 Al-Mg Si > 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,210       Cutting Speed (m/min.) 56-70 
7.1  Thermo-Plastics                                                Feed (mm/rev.) 0,290       Cutting Speed (m/min.) 40-58 

Comparative


You have no product to compare.