4386525,00 mm-FRESA HSSE8% DIN844N NZ SIN-CORTE-CENTRO-
mat HSSE 8%CO
mat HSSE 8%CO+TIALSIN
DIN 844 N
caract fresa sin corte centro
caract broca angulo helice 30
caract fresa mango weldon
caract fresa frontal recta
aplic acabado
cotas fresa cilindrica
aplic fresa acabado 01 2
PDF Cat.
tabla materiales ind
formula fresas

Ref.: 4400

06,50 mm-END MILL HSSE8% DIN844N NZ NON-CENTER-CUT

Product Code: 43805
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 844
DIN Type Tooltip
COM_VIRTUEMART_336123
  • N
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • HSSE 8% Co
D mm Tooltip
COM_VIRTUEMART_335920
  • 6.50
d mm Tooltip
COM_VIRTUEMART_335925
  • 10.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 66.00
l mm Tooltip
COM_VIRTUEMART_336002
  • 16.00
Z Tooltip
COM_VIRTUEMART_336171
  • 4
Helix Angle Tooltip
COM_VIRTUEMART_335881
  • 30º
Shank
COM_VIRTUEMART_336020
  • Weldon
ISO Tooltip
COM_VIRTUEMART_336000
  • 1641
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Copper-Bronze-Brass
  • Cast Iron
  • Steel
Mat Tooltip
COM_VIRTUEMART_336022
  • Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Cast Iron (200-300 HB / 700-1000 N/mm2)
  • Cast Iron (<200 HB / <700 N/mm2)
  • Construction / Carbon Steel (<250 HB / <850 N/mm2)

1.1 Construction / Carbon Steel  (<250 HB/<850 N/mm2)               Feed (mm/rev.) 0,035    Cutting Speed (m/min.) 25-35 
3.1 Cast Iron  (<200 HB / <700 N/mm2)                               Feed (mm/rev.) 0,035    Cutting Speed (m/min.) 20-30 
3.2 Cast Iron  (200-300 HB / 700-1000 N/mm2)                        Feed (mm/rev.) 0,035    Cutting Speed (m/min.) 15-20 
5.1 Short Chip Copper-Bronze-Brass  (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,035    Cutting Speed (m/min.) 60-100 
5.2 Long Chip Copper-Bronze-Brass   (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,035    Cutting Speed (m/min.) 60-100 

Comparative


You have no product to compare.