4169209,50 mm-FRESA HSSE8% DIN844W 3Z-TIALSIN
mat HSSE 8%CO
mat HSSE 8%CO+TIALSIN
DIN 844 W
caract fresa 3z corte centro
caract broca angulo helice 45
caract fresa mango weldon
caract fresa frontal recta
aplic acabado
cotas fresa cilindrica
aplic fresa ranurado 01 3z 1
PDF Cat.
tabla materiales ind
formula fresas

Ref.: 4430

08,50 mm-END MILL HSSE8% DIN844W 3Z-TIALSIN

Product Code: 41688
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 844
DIN Type Tooltip
COM_VIRTUEMART_336123
  • W
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • HSSE 8% Co
Coating Tooltip
COM_VIRTUEMART_336103
  • TIALSIN
D mm Tooltip
COM_VIRTUEMART_335920
  • 8.50
d mm Tooltip
COM_VIRTUEMART_335925
  • 10.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 69.00
l mm Tooltip
COM_VIRTUEMART_336002
  • 19.00
Z Tooltip
COM_VIRTUEMART_336171
  • 3
Helix Angle Tooltip
COM_VIRTUEMART_335881
  • 45º
Shank
COM_VIRTUEMART_336020
  • Weldon
ISO Tooltip
COM_VIRTUEMART_336000
  • 1641
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Aluminium-Magnesium
  • Steel
Mat Tooltip
COM_VIRTUEMART_336022
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
  • Construction / Carbon Steel (<250 HB / <850 N/mm2)

1.1 Construction / Carbon Steel  (<250 HB/<850 N/mm2)               Feed (mm/rev.) 0,050    Cutting Speed (m/min.) 40-56 
6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2)                        Feed (mm/rev.) 0,067    Cutting Speed (m/min.) 220-280 
6.2 Al-Mg Si < 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,067    Cutting Speed (m/min.) 220-280 
6.3 Al-Mg Si > 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,050    Cutting Speed (m/min.) 70-110 

Comparative


You have no product to compare.