6475625,00 mm-FRESA HSSE8% DIN844W LARGA 3Z-TIALSIN
mat HSSE 8%CO
mat HSSE 8%CO+TIALSIN
DIN 844 W
caract fresa 3z corte centro
caract broca angulo helice 45
caract fresa mango weldon
caract fresa frontal recta
aplic acabado
cotas fresa cilindrica
aplic fresa ranurado 02 3z
PDF Cat.
tabla materiales ind
formula fresas

Ref.: 4432

04,50 mm-END MILL HSSE8% DIN844W LONG 3Z-TIALSIN

Product Code: 17380
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 844
DIN Type Tooltip
COM_VIRTUEMART_336123
  • W
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • HSSE 8% Co
Coating Tooltip
COM_VIRTUEMART_336103
  • TIALSIN
D mm Tooltip
COM_VIRTUEMART_335920
  • 4.50
d mm Tooltip
COM_VIRTUEMART_335925
  • 6.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 63.00
l mm Tooltip
COM_VIRTUEMART_336002
  • 19.00
Z Tooltip
COM_VIRTUEMART_336171
  • 3
Helix Angle Tooltip
COM_VIRTUEMART_335881
  • 45º
Shank
COM_VIRTUEMART_336020
  • Weldon
ISO Tooltip
COM_VIRTUEMART_336000
  • 1641
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Aluminium-Magnesium
  • Steel
Mat Tooltip
COM_VIRTUEMART_336022
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
  • Construction / Carbon Steel (<250 HB / <850 N/mm2)

1.1 Construction / Carbon Steel  (<250 HB/<850 N/mm2)               Feed (mm/rev.) 0,030    Cutting Speed (m/min.) 40-56 
6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2)                        Feed (mm/rev.) 0,042    Cutting Speed (m/min.) 220-280 
6.2 Al-Mg Si < 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,042    Cutting Speed (m/min.) 220-280 
6.3 Al-Mg Si > 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,030    Cutting Speed (m/min.) 70-110 

Comparative


You have no product to compare.