4526020,00 mm-FRESA PMX DIN327N 2Z-
mat PMX
mat PMX+TIALCN
DIN 327 N
caract fresa 2z
caract broca angulo helice 30
caract fresa mango weldon
caract fresa frontal recta
aplic acabado
cotas fresa cilindrica
aplic fresa ranurado 01 2z
PDF Cat.
tabla materiales ind
formula fresas

Ref.: 6420

25,00 mm-END MILL PMX DIN327N 2Z

Product Code: 11119
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 327
DIN Type Tooltip
COM_VIRTUEMART_336123
  • N
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • PMX
D mm Tooltip
COM_VIRTUEMART_335920
  • 25.00
d mm Tooltip
COM_VIRTUEMART_335925
  • 25.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 102
l mm Tooltip
COM_VIRTUEMART_336002
  • 26.00
Z Tooltip
COM_VIRTUEMART_336171
  • 2
Helix Angle Tooltip
COM_VIRTUEMART_335881
  • 30º
Shank
COM_VIRTUEMART_336020
  • Weldon
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Aluminium-Magnesium
  • Thermo-Resistant Alloys
  • Cast Iron
  • Steel
Mat Tooltip
COM_VIRTUEMART_336022
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
  • Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Titanium Alloys
  • Cast Iron (200-300 HB / 700-1000 N/mm2)
  • Cast Iron (<200 HB / <700 N/mm2)
  • Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
  • Alloyed Steel (<300 HB / <1000 N/mm2)
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
  • Construction / Carbon Steel (<250 HB / <850 N/mm2)

1.1 Construction / Carbon Steel  (<250 HB/<850 N/mm2)               Feed (mm/rev.) 0,115    Cutting Speed (m/min.) 35-45 
1.2 Alloyed Steel  (<300 HB / <1000 N/mm2)                          Feed (mm/rev.) 0,115    Cutting Speed (m/min.) 30-42 
1.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/850-1300N/mm2)  Feed (mm/rev.) 0,075    Cutting Speed (m/min.) 12-18 
3.1 Cast Iron  (<200 HB / <700 N/mm2)                               Feed (mm/rev.) 0,115    Cutting Speed (m/min.) 24-36 
3.2 Cast Iron  (200-300 HB / 700-1000 N/mm2)                        Feed (mm/rev.) 0,115    Cutting Speed (m/min.) 24-36 
4 Titanium Alloys                                                   Feed (mm/rev.) 0,150    Cutting Speed (m/min.) 18-24 
5.1 Short Chip Copper-Bronze-Brass  (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,150    Cutting Speed (m/min.) 70-120 
5.2 Long Chip Copper-Bronze-Brass   (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,115    Cutting Speed (m/min.) 70-120 
6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2)                        Feed (mm/rev.) 0,150    Cutting Speed (m/min.) 190-240 
6.2 Al-Mg Si < 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,150    Cutting Speed (m/min.) 190-240 
6.3 Al-Mg Si > 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,115    Cutting Speed (m/min.) 60-96 

Comparative


You have no product to compare.