67456CONCAVE HALF CIRCLE CUTTER R10-FRESA AGUJERO HSSE DIN855 CONCAVA-
mat HSSE 5%CO
DIN 855
cotas 5050
PDF Cat.
tabla materiales ind
formula fresas

Ref.: 5050

01,60-HALF CIRCLE CUTTER HSSE DIN855 CONCAVE

Product Code: 54510
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 855
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • HSSE 5% Co
D mm Tooltip
COM_VIRTUEMART_335920
  • 50.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 8.00
Z Tooltip
COM_VIRTUEMART_336171
  • 14
d1. mm
COM_VIRTUEMART_335928
  • 16.00
R Tooltip
COM_VIRTUEMART_336099
  • 1.60
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Synthetic-Plastics
  • Aluminium-Magnesium
  • Copper-Bronze-Brass
  • Thermo-Resistant Alloys
  • Cast Iron
  • Stainless
  • Steel
Mat Tooltip
COM_VIRTUEMART_336022
  • Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Titanium Alloys
  • Cast Iron (200-300 HB / 700-1000 N/mm2)
  • Cast Iron (<200 HB / <700 N/mm2)
  • Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
  • Austenitic Stainless (<250 HB / <850 N/mm2)
  • Alloyed Steel (<300 HB / <1000 N/mm2)
  • Hard-Plastics
  • Thermo-Plastics
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
  • Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Construction / Carbon Steel (<250 HB / <850 N/mm2)
Art Tooltip
COM_VIRTUEMART_335891
  • 54510

P.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) 0,04 Cutting Speed (m/min.) 20-30
P.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) 0,04 Cutting Speed (m/min.) 15-20
P.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/850-1300N/mm2) Feed (mm/rev.)0,04 Cutting Speed (m/min.) 12-16
M Austenitic Stainless (<250 HB / <850 N/mm2) Feed (mm/rev.) 0,06 Cutting Speed (m/min.) 15-20
P.5 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.) 0,04 Cutting Speed (m/min.) 15-20
K.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,08 Cutting Speed (m/min.) 12-18
K.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) 0,06 Cutting Speed (m/min.) 12-18
S Titanium Alloys Feed (mm/rev.) 0,05 Cutting Speed (m/min.) 20-30
N.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,08 Cutting Speed (m/min.) 25-32
N.2 Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,08 Cutting Speed (m/min.) 60-100
N.3 Al-Mg non-alloyed (<100 HB / <350 N/mm2) Feed (mm/rev.) 0,05 Cutting Speed (m/min.) 180-250
N.4 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,05 Cutting Speed (m/min.) 180-250
N.5 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,04 Cutting Speed (m/min.) 50-60
N.6 Thermo-Plastics Feed (mm/rev.) 0,05 Cutting Speed (m/min.) 100-150
N.7 Hard-Plastics Feed (mm/rev.) 0,05 Cutting Speed (m/min.) 100-150

Comparative


You have no product to compare.