4937603,00 mm-FRESA MADRE HSSE MODULAR TALLADO-ENGRANAJES DIN858-
IC01
mat_TIN_web
DIN 858
PDF Cat.
tabla materiales ind
formula fresas

Ref.: 5206

01,25 mm-GEAR HOB HSSCO INVOLUTE DIN858

Product Code: 71571
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 858
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • HSSE 5% Co
D mm Tooltip
COM_VIRTUEMART_335920
  • 50.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 50
d1. mm
COM_VIRTUEMART_335928
  • 22.00
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Synthetic-Plastics
  • Aluminium-Magnesium
  • Copper-Bronze-Brass
  • Thermo-Resistant Alloys
  • Cast Iron
  • Stainless
  • Steel
Mat Tooltip
COM_VIRTUEMART_336022
  • Austenitic Stainless (<250 HB / <850 N/mm2)
  • Alloyed Steel (<300 HB / <1000 N/mm2)
  • Hard-Plastics
  • Thermo-Plastics
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
  • Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Construction / Carbon Steel (<250 HB / <850 N/mm2)
  • Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
  • Cast Iron (<200 HB / <700 N/mm2)
  • Cast Iron (200-300 HB / 700-1000 N/mm2)
  • Titanium Alloys
  • Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
P.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) Tooltip
COM_VIRTUEMART_335803
  • 1-3
Cutting Speed (m/min.) Tooltip
COM_VIRTUEMART_335805
  • 40-50
P.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) Tooltip
COM_VIRTUEMART_335807
  • 1-2.50
Cutting Speed (m/min.) Tooltip
COM_VIRTUEMART_335809
  • 25-32
P.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/1000-1300N/mm2) Feed (mm/rev.) Tooltip
COM_VIRTUEMART_335811
  • 0.90-2
Cutting Speed (m/min.) Tooltip
COM_VIRTUEMART_335813
  • 20-25
K.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) Tooltip
COM_VIRTUEMART_335826
  • 1-2.5
Cutting Speed (m/min.) Tooltip
COM_VIRTUEMART_335828
  • 25-40
K.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) Tooltip
COM_VIRTUEMART_335830
  • 0.80-2
Cutting Speed (m/min.) Tooltip
COM_VIRTUEMART_335832
  • 16-20
Art Tooltip
COM_VIRTUEMART_335891
  • 49349

1.1 Construction / Carbon Steel  (<250 HB/<850 N/mm2)               Feed (mm/rev.) 1-3      Cutting Speed (m/min.) 40-50 
1.2 Alloyed Steel  (<300 HB / <1000 N/mm2)                          Feed (mm/rev.) 1-2,50   Cutting Speed (m/min.) 25-32 
1.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/850-1300N/mm2)  Feed (mm/rev.) 0,90-2   Cutting Speed (m/min.) 20-25 
3.1 Cast Iron  (<200 HB / <700 N/mm2)                               Feed (mm/rev.) 1-2,5    Cutting Speed (m/min.) 25-40 
3.2 Cast Iron  (200-300 HB / 700-1000 N/mm2)                        Feed (mm/rev.) 0,80-2   Cutting Speed (m/min.) 16-20 

Comparative


You have no product to compare.