67386063X1,00X22-FRESA SIERRA CIRCULAR HSS DIN1838N FORMA-B-
mat HSS
DIN 1838 N
PDF Cat.
tabla materiales ind

Ref.: 4210

125X1,20X22 Z64-SLITTING SAW HSS DIN1838N FORM-B

Product Code: 65240
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 1838
DIN Type Tooltip
COM_VIRTUEMART_336123
  • N
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • HSS
D mm Tooltip
COM_VIRTUEMART_335920
  • 125
d mm Tooltip
COM_VIRTUEMART_335925
  • 22.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 1.20
Z Tooltip
COM_VIRTUEMART_336171
  • 64
ISO Tooltip
COM_VIRTUEMART_336000
  • 2296
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Synthetic-Plastics
  • Aluminium-Magnesium
  • Copper-Bronze-Brass
  • Cast Iron
  • Stainless
  • Steel
Mat Tooltip
COM_VIRTUEMART_336022
  • Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Cast Iron (200-300 HB / 700-1000 N/mm2)
  • Cast Iron (<200 HB / <700 N/mm2)
  • Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
  • Austenitic Stainless (<250 HB / <850 N/mm2)
  • Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
  • Alloyed Steel (<300 HB / <1000 N/mm2)
  • Hard-Plastics
  • Thermo-Plastics
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
  • Construction / Carbon Steel (<250 HB / <850 N/mm2)

P.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) 0,020-0, Cutting Speed (m/min.) 20-40
P.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) 0,015 Cutting Speed (m/min.) 10-30
P.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/850-1300N/mm2) Feed (mm/rev.)0,010 Cutting Speed (m/min.) 8-15
M Austenitic Stainless (<250 HB / <850 N/mm2) Feed (mm/rev.) 0,010 Cutting Speed (m/min.) 8-15
P.5 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.) 0,010 Cutting Speed (m/min.) 8-15
K.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 30-40
K.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 30-40
N.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,035 Cutting Speed (m/min.) 150-200
N.2 Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,035 Cutting Speed (m/min.) 150-200
N.3 Al-Mg non-alloyed (<100 HB / <350 N/mm2) Feed (mm/rev.) 0,050 Cutting Speed (m/min.) 600-750
N.4 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,050 Cutting Speed (m/min.) 600-750
N.5 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,050 Cutting Speed (m/min.) 600-750
N.6 Thermo-Plastics Feed (mm/rev.) 0,050 Cutting Speed (m/min.) 100-130
N.7 Hard-Plastics Feed (mm/rev.) 0,050 Cutting Speed (m/min.) 100-130

Comparative


You have no product to compare.