317041,45 mm-BROCA HSS DIN340N LARGA-
mat HSS
DIN 340 N
caract broca angulo punta 118
caract broca afilado univ 1
cotas broca cilindrica
aplic taladrado -10d
PDF Cat.
tabla materiales ind
formula brocas

Ref.: 1030

18,75 mm-DRILL BIT HSS DIN340N LONG

Product Code: 12071
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 340
DIN Type Tooltip
COM_VIRTUEMART_336123
  • N
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • HSS
D mm Tooltip
COM_VIRTUEMART_335920
  • 18.75
d mm Tooltip
COM_VIRTUEMART_335925
  • 18.75
L mm Tooltip
COM_VIRTUEMART_336001
  • 247
l mm Tooltip
COM_VIRTUEMART_336002
  • 162
Point Angle Tooltip
COM_VIRTUEMART_335884
  • 118º
Shank
COM_VIRTUEMART_336020
  • Straight
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Cast Iron
  • Aluminium-Magnesium
  • Steel
Mat Tooltip
COM_VIRTUEMART_336022
  • Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
  • Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
  • Al-Mg non-alloyed (<100 HB / <350 N/mm2)
  • Cast Iron (200-300 HB / 700-1000 N/mm2)
  • Construction / Carbon Steel (<250 HB / <850 N/mm2)
  • Cast Iron (<200 HB / <700 N/mm2)
P.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) Tooltip
COM_VIRTUEMART_335803
  • 0.250
Cutting Speed (m/min.) Tooltip
COM_VIRTUEMART_335805
  • 25-30
K.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) Tooltip
COM_VIRTUEMART_335826
  • 0.360
Cutting Speed (m/min.) Tooltip
COM_VIRTUEMART_335828
  • 30-35
K.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) Tooltip
COM_VIRTUEMART_335830
  • 0.280
Cutting Speed (m/min.) Tooltip
COM_VIRTUEMART_335832
  • 25-30
N.3 mm/rev. Tooltip
COM_VIRTUEMART_335846
  • 0.450
N.3 Vc Tooltip
COM_VIRTUEMART_335848
  • 60-80
N.4 mm/rev. Tooltip
COM_VIRTUEMART_335850
  • 0.450
N.4 Vc Tooltip
COM_VIRTUEMART_335852
  • 60-80
COM_VIRTUEMART_335856 Tooltip
COM_VIRTUEMART_335856
  • 40-50

P.1 Construction / Carbon Steel  (<250 HB/<850 N/mm2)               Feed (mm/rev.) 0,250       Cutting Speed (m/min.) 25-30 
K.1 Cast Iron  (<200 HB / <700 N/mm2)                               Feed (mm/rev.) 0,360       Cutting Speed (m/min.) 30-35 
K.2 Cast Iron  (200-300 HB / 700-1000 N/mm2)                        Feed (mm/rev.) 0,280       Cutting Speed (m/min.) 25-30 
N.3 Al-Mg non-alloyed (<100 HB / <350 N/mm2)                        Feed (mm/rev.) 0,450       Cutting Speed (m/min.) 60-80 
N.4 Al-Mg Si < 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,450       Cutting Speed (m/min.) 60-80 
N.5 Al-Mg Si > 10% Alloy  (<180 HB / <600 N/mm2)                    Feed (mm/rev.) 0,360       Cutting Speed (m/min.) 40-50 

Comparative


You have no product to compare.

24h lateral