6768306,80 mm-BROCA METAL DURO DIN340N LARGA-
mat MD
DIN 340 N
caract broca angulo punta 118
caract broca punta md frontal
cotas broca cilindrica
aplic taladrado -10d
PDF Cat.
tabla materiales ind
formula brocas

Ref.: 9036

03,00 mm-DRILL BIT CARBIDE DIN340N LONG

Product Code: 71813
TECHNICAL DETAILS:
DIN Tooltip
COM_VIRTUEMART_335936
  • 340
DIN Type Tooltip
COM_VIRTUEMART_336123
  • N
Tool Mat Tooltip
COM_VIRTUEMART_336055
  • Carbide
D mm Tooltip
COM_VIRTUEMART_335920
  • 3.00
d mm Tooltip
COM_VIRTUEMART_335925
  • 3.00
L mm Tooltip
COM_VIRTUEMART_336001
  • 100.00
l mm Tooltip
COM_VIRTUEMART_336002
  • 66.00
Point Angle Tooltip
COM_VIRTUEMART_335884
  • 118º
Shank
COM_VIRTUEMART_336020
  • Straight
Uds Pack Tooltip
COM_VIRTUEMART_336156
  • 1
APPLICATION Tooltip
Group
COM_VIRTUEMART_335978
  • Synthetic-Plastics
  • Copper-Bronze-Brass
  • Thermo-Resistant Alloys
  • Cast Iron
  • Stainless
  • Steel
Mat Tooltip
COM_VIRTUEMART_336022
  • Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
  • Titanium Alloys
  • Cast Iron (200-300 HB / 700-1000 N/mm2)
  • Cast Iron (<200 HB / <700 N/mm2)
  • Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
  • Austenitic Stainless (<250 HB / <850 N/mm2)
  • Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
  • Hard-Plastics
  • Alloyed Steel (<300 HB / <1000 N/mm2)

1.2 Alloyed Steel  (<300 HB / <1000 N/mm2)                          Feed (mm/rev.) 0,025    Cutting Speed (m/min.) 30-50 
1.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/850-1300N/mm2)  Feed (mm/rev.) 0,020    Cutting Speed (m/min.) 10-15 
2.1 Austenitic Stainless  (<250 HB / <850 N/mm2)                    Feed (mm/rev.) 0,020    Cutting Speed (m/min.) 10-25 
2.2 Ferritic/Martensitic Stainless  (320HB/<850 N/mm2)              Feed (mm/rev.) 0,020    Cutting Speed (m/min.) 12-25 
3.1 Cast Iron  (<200 HB / <700 N/mm2)                               Feed (mm/rev.) 0,040    Cutting Speed (m/min.) 50-90 
3.2 Cast Iron  (200-300 HB / 700-1000 N/mm2)                        Feed (mm/rev.) 0,020    Cutting Speed (m/min.) 40-60 
4 Titanium Alloys                                                   Feed (mm/rev.) 0,030    Cutting Speed (m/min.) 20-35 
5.1 Short Chip Copper-Bronze-Brass  (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,060    Cutting Speed (m/min.) 40-100 
5.2 Long Chip Copper-Bronze-Brass   (<200 HB / <700 N/mm2)          Feed (mm/rev.) 0,060    Cutting Speed (m/min.) 40-100 
7.2  Hard-Plastics                                                  Feed (mm/rev.) 0,040    Cutting Speed (m/min.) 20-100 

Comparative


You have no product to compare.